TeVo X2
by EPEAK Gears
The TeVo X2 is a hat (extension board) for Raspberry Pi 1, 2 and 3. It adds sensor inputs for K-Type temperature read-out and Voltmeter.
Designed with overclocking telemetry in mind it comes with specifically calibrated K-Type thermocouples. Of course, the TeVo X2 can be used for any other application with similar requirements.
The TeVo X2 also has two I2C ports for additional extensions. The most popular extension to date is the ROG_EXT extension (see Extension section).
The TeVo X2 can be purchased either as :
- Pro Pack: TeVo X2 telemetry hat, Raspberry Pi 2, SD Card, US-Power Adapter with USB cable, ROG_EXT, 2x K-Type calibrated probes, 1x Grove 30cm cable, 1 Year of Overlay.live Premium.
- Starter Pack: TeVo X2 telemetry hat, 1x K-type calibrated probe, 1x ROG_EXT , 1x Grove 30cm cable, 3 months of Overlay.live Premium
Technical Specifications
Interfaces:
- 2x K-Type socket for miniature type plug
- Range : -200C to +150C (packaged with 2 callibrated probes)
- 2x Voltmeter inputs
- Range : 0-14V
- 2x I2C Grove-type connector
- Pin1 – Yellow (SCA), Pin2 -White (SCL), Pin3 – Red (VCC at 3V3), Pin4 – Black (GND)
Compatibility:
- Standard HAT layout for Raspberry Pi 1, 2 and 3
- Clips on top of the 40pin connector
- Can be secured with optional standoffs
Pro Pack content
To make it easy, we package the TeVo X2 telemetry hat with all the required items necessary for it to operate at full potential.
RaspberryPi
USB Power Adapter
TeVo X2
K-Type Thermocouple (x2)
ROG_EXT
Grove extension cable (30cm – x1)
8GB SD Card
Overlay.live Premium
Extensions
The TeVo X2 comes with two I2C grove-type sockets. Listed below are the extensions which are fully compatible and supported out of the box by Overlay.live.
If you’ve built and extension and would like to make it compatible, contact us.
ROG_EXT
by ElmorLabs
The ROG_EXT is a clip-on device designed by ElmorLabs for most ASUS ROG motherboards. The ROG_EXT connects on the ROG_EXT pins of the motherboard and takes the place of the ASUS OC Panel.
With the ROG_EXT hooked-up to any I2C port of the TeVo X2, you are able to stream to overlay.live read-outs from the motherboard in real time.
Readings supported:
- Boot Code
- BCLK
- CPU ratio
- CPU Frequency (calculated)
- Vcore
- CPU cache ratio
- Temperature 1
- Temperature 2
- V1
- V2
- DRAM voltage
The ROG_EXT device comes bundled with the TeVo X2 Overlay.live package – It can also be purchase separately..
